Updated Free Cisco 350-601 Test Engine Questions with 455 Q&As
The Best CCNP Data Center 350-601 Professional Exam Questions
NEW QUESTION # 102
What is required for using Puppet in a Cisco NX-OS environment?
- A. NX-API
- B. OpenNP
- C. Open Agent Container
- D. XML management interface
Answer: C
NEW QUESTION # 103 
Refer to the exhibit. A secure server that provides services to EPG-2 must be placed in EPG-1. The remaining EPGs-EPG-2, EPG-3. and EPG-4-must communicate without any contracts. Which set of actions accomplishes this goal?
- A. Option A
- B. Option B
- C. Option C
- D. Option D
Answer: B
NEW QUESTION # 104
Refer to the exhibit.
What is configured as a result of running these commands?
- A. strict unicast RPF
- B. loose unicast RPF
- C. IP Source Guard
- D. reverse lookup for outbound packets
Answer: A
NEW QUESTION # 105
Refer to the exhibit.
An engineer is configuring a VSAN on the network Which option must be selected to create the VSAN?
- A. Common/Global
- B. Fabric B
- C. Fabric A
- D. FC Zoning Enabled
Answer: C
NEW QUESTION # 106
Refer to the exhibit.
Which VLANs are capable to be assigned on vPC interfaces?
- A. 100-104
- B. 100-102
- C. 100-103
- D. 100-105
Answer: D
NEW QUESTION # 107
Refer to the exhibit.
Which result of running the command is true?
- A. PIM join messages are suspended.
- B. MRIB is flushed
- C. The PIM database is deleted.
- D. Multicast traffic forwarding is suspended.
Answer: C
Explanation:
Explanation
When you restart PIM, the following tasks are performed: The PIM database is deleted. The MRIB and MFIB are unaffected and forwarding of traffic continues. The multicast route ownership is verified through the MRIB. Periodic PIM join and prune messages from neighbors are used to repopulate the database.
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/6-x/multicast/configuration/guide/b_C
NEW QUESTION # 108
Refer to the exhibit.
Refer to the exhibit. A developer must create a Bash script that performs a Chef Client reload in the event of a system reset Which command completes the script?
- A. Option A
- B. Option D
- C. Option C
- D. Option B
Answer: B
NEW QUESTION # 109
A Cisco MDS 9000 Series Switch is configured for SAN Analytics and SAN Telemetry Streaming. An engineer must enable analytics for NVMe on interfaces in the range of fc1/1-12. Due to a large amount of traffic generated in the SAN environment, the data must be collected at regular intervals of 60 seconds from ports fc 1-12 and then for ports fc13-24 for the next 60 seconds. Ports in the range fc4/13-14 were already enabled for analytics. Which set of commands must be used to meet these requirements?
- A. Option A
- B. Option D
- C. Option C
- D. Option B
Answer: B
NEW QUESTION # 110
A network engineer needs to upgrade the EPLDs of the fabric modules for a Cisco MDS director-class switch.
In which order are components reloaded during the process?
- A. all fabric modules followed by the entire switching platform
- B. all fabric modules in parallel
- C. one module and one supervisor at the time
- D. one fabric module at the time
Answer: B
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/7_3/release
_notes/epld/epld_rn_7x.html
Graphical user interface, text, application Description automatically generated
NEW QUESTION # 111
Which two statements about modifying Cisco UCS user accounts are true? (Choose two.)
- A. The password of the user account expires in 30 days.
- B. Disabling a user account maintains all of the data in the Cisco UCS Fabric Interconnect.
- C. Local user accounts override the same account on a remote authentication server, such as TACACS, RADIUS, or LDAP.
- D. The admin account can be used to log on by using SSH only.
- E. The password of the user account must contain a minimum of 10 characters.
Answer: B,C
Explanation:
Section: Storage Network
Explanation/Reference:
NEW QUESTION # 112
AN engineer enters these commands while in EEM on a Cisco Nexus 9000 Series Switch.
event manager applet Backup-config
event timer watchdog time 1800 name timer
event cli match "copy running-config startup-config"
what is the result of applying this configuration?
- A. It blocks the copy running-config startup-config command.
- B. It executes the copy running-config startup-config command.
- C. It generates an error because no action is mentioned.
- D. It saves the running configuration every 1800 seconds.
Answer: C
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/93x/system-management/b-cisco-nexu
NEW QUESTION # 113
The engineer must configure SPAN on a Cisco Nexus 5000 Series Switch to get a capture of the traffic from these applications for an in-depth packet analysis.
Which two SPAN characteristics must be considered? (Choose two.)
- A. Only Ethernet, FC, vFC, port channel port types can be used as SPAN source ports.
- B. The rx/tx option is available for VLAN or VSAN SPAN sessions.
- C. SPAN source ports can be monitored in multiple SPAN sessions.
- D. A SPAN source port cannot be a destination SPAN port.
- E. The Ethernet, FC, vFC, port channel, SAN port channel can be used as SPAN source ports.
Answer: D,E
Explanation:
Section: Network
NEW QUESTION # 114
What happens to the default host firmware policy after a Cisco UCS Manager upgrade?
- A. It is replaced by a new default policy without any firmware entries.
- B. It is assigned to all the service profiles that include a host firmware policy.
- C. It is updated to contain the firmware entries of all the components.
- D. It is set to match the host firmware policy.
Answer: B
Explanation:
Section: Compute
NEW QUESTION # 115
A network engineer must configure FCoE on an interface of a Cisco MDS 9000 Series Switch. It should be used for mapping between VLAN 600 and VSAN 6. Drag and drop the commands from the bottom into their implementation order in the FCoE configuration. Not all commands are used.
Answer:
Explanation:
Explanation
Graphical user interface, text Description automatically generated
NEW QUESTION # 116
An engineer is implementing FCoE. Which aspect of DCBXP on a Cisco Nexus switch affects this implementation?
- A. It provides the authentication of peers on the Cisco Nexus switch.
- B. It uses the Cisco Fabric Services protocol to exchange parameters between two peer links.
- C. It requires that LLDP transmit and LLDP receive are enabled on the FCoE interface.
- D. It always is enabled on 10/100-Mbps native Ethernet ports.
Answer: C
NEW QUESTION # 117
A network engineer must configure a Fibre Channel port monitoring for the local port. The source port should be monitored in the ingress direction. which configuration should be implemented to achieve this objective?
- A. Option A
- B. Option B
- C. Option C
- D. Option D
Answer: B
NEW QUESTION # 118
Which protocol does Cisco Hyperflex use to share data among nodes in a VMware vSphere environment?
- A. NFS
- B. SMB
- C. FCoE
- D. CIFS
Answer: A
NEW QUESTION # 119
Refer to the exhibit.
Refer to the exhibit A network administrator experiences these issues with the network:
PC1 is experiencing a buffering problem for video applications
The servers that are connected to SW2 are experiencing packet drops when they connect to the Internet The engineer wants to configure the required traffic capture to investigate the issue further Which configuration must be implemented to monitor the traffic?
- A. Option A
- B. Option D
- C. Option C
- D. Option B
Answer: B
NEW QUESTION # 120
......
Cisco 350-601 exam is an important certification for IT professionals who work with data center technologies. Implementing Cisco Data Center Core Technologies (350-601 DCCOR) certification demonstrates that the candidate has the knowledge and skills needed to design, implement, and manage data center technologies using Cisco products and solutions. Implementing Cisco Data Center Core Technologies (350-601 DCCOR) certification is recognized by employers around the world and can help IT professionals advance their careers in the field of data center technologies.
Try 100% Updated 350-601 Exam Questions [2024]: https://freetorrent.pdfdumps.com/350-601-valid-exam.html