Practice HPE6-A73 Questions With Certification guide Q&A from Training Expert PDFDumps
Free HP HPE6-A73 Test Practice Test Questions Exam Dumps
HP HPE6-A73 certification exam is a highly respected certification exam in the field of networking. Aruba Certified Switching Professional Exam certification exam is designed to test the knowledge and skills of professionals who are responsible for configuring and managing enterprise-level Aruba switching solutions. The HPE6-A73 exam is intended for professionals who have already gained some experience in the networking field and are looking to take their skills to the next level.
NEW QUESTION # 17
Which concept is implemented using Aruba's dynamic segmentation?
- A. Root of trust
- B. Colorless port
- C. Device fingerprinting
- D. Zero Touch Provisioning
Answer: C
NEW QUESTION # 18
Examine the network exhibit:
The ACL configuration defined on Core-1 is as follows:
If telnet was being used, which device connection would be permitted and functional in both directions?
(Choose two.)
- A. Server 1 to Client 1
- B. Client 3 to Client 2
- C. Client 1 to Client 3
- D. Client 1 to Client 2
- E. Server 2 to Client 2
Answer: A,D
Explanation:
CL3 - CL2 - drop on forward path by core1 cause match VLAN 20 and CL3 not CL1 as SRC IP CL1 - CL2 - pass - no ACL cause forwarded by Access2 SR2 - CL2 - pass on forward path by core1 cause match VLAN 10 Drop on return path by core1 cause match VLAN 20 and no CL1 as SRC IP SR1 - CL1 - pass on forward path by core1 cause match VLAN 10 pass on return path by core1 cause match VLAN 20 and CL1 as SRC IP CL1 - CL3 - pass on forward path by core1 cause match VLAN 20 and CL1 as SRC IP drop on return path by core1 cause match VLAN 20 and not CL1 but CL3 as SRC IP
NEW QUESTION # 19
A company has implemented 802 1X authentication on AOS-CX access switches, where two ClearPass servers are used to implement AAA Each switch has the two servers defined A network engineer notices the following command configured on the AOS'CX switches:
radius-server tracking user-name monitor password plaintext arubal23
What is the purpose of this configuration?
- A. Speed up the AAA authentication process
- B. Define the account to implement downloadable user roles
- C. Define the account to implement change of authorization.
- D. implement replay protection for AAA messages
Answer: A
NEW QUESTION # 20
A company has implemented 802.1X authentication on AOS-CX access switches, where two ClearPass servers are used to implement AAA.
Each switch has the two servers defined. A network engineer notices the following command configured on the AOS-CX switches:
radius-server tracking user-name monitor password plaintext aruba123
What is the purpose of this configuration?
- A. Implement replay protection for AAA messages
- B. Speed up the AAA authentication process
- C. Define the account to implement downloadable user roles
- D. Define the account to implement change of authorization
Answer: B
Explanation:
Radius service tracking locates the availability of the RADIUS service configured on the switch. It helps to minimize the waiting period for new clients in the unauth-vid (Guest Vlan) when authentication fails because of service is not available, as well as previously authenticated clients in unauth-vid (Guest Vlan) when re-authentication fails because service is not available during the re-authentication period. Note that this feature is disabled by default.
https://techhub.hpe.com/eginfolib/networking/docs/switches/WB/16-02/5200-1650_WB_ASG/content/ch04s04.html
NEW QUESTION # 21
What are best practices when implementing VSX on AOS-CX switches? (Choose two.)
- A. The ISL lag should use the default MTU size.
- B. The default system MAC addresses should be used.
- C. The ISL lag should use at least 10GbE links or faster.
- D. Timers should be left at their default values.
- E. The keepalive connection should use a direct layer-3 connection.
Answer: D,E
NEW QUESTION # 22
An AOS-CX switch is configured to implement downloadable user roles. Examine the AOS-CX switch output:
Based on this output, what is the state of the user's access?
- A. No downloadable user role exists
- B. The port should be configured for 802.1X
- C. The RADIUS request timed out to the AAA server
- D. MAC authentication has passed, but 802.1X authentication is in progress
Answer: B
NEW QUESTION # 23
An administrator of a company has concerns about upgrading the access layer switches The users rely heavily on wireless and VoIP telephony Which is the best recommendation to ensure a short downtime for the users during upgrading the access layer switches?
- A. Implement VSX on the AOS-CX access switches
- B. install AOS-CX 6300 or 6400 switches with always-on POE.
- C. Implement VSF on the AOS-CX access switches
- D. Install the in-service software upgrade (ISSU) feature with clustering enabled
Answer: B
NEW QUESTION # 24
Examine the network exhibit:
The ACL configuration defined on Core-1 is as follows:
If telnet was being used, which device connection would be permitted and functional in both directions?
(Choose two.)
- A. Server 1 to Client 1
- B. Client 3 to Client 2
- C. Client 1 to Client 3
- D. Client 1 to Client 2
- E. Server 2 to Client 2
Answer: A,D
NEW QUESTION # 25
Which concept is implemented using Aruba's dynamic segmentation?
- A. Device fingerprinting
- B. Root of trust
- C. Colorless port
- D. Zero Touch Provisioning
Answer: C
NEW QUESTION # 26
An administrator has an aggregation layer of 8325CX switches configured as a VSX pair. The administrator is concerned that when OSPF network changes occur, the aggregation switches will respond to the changes slowly, and this will affect network connectivity, especially VoIP calls, in the connected access layer switches.
What should the administrator do on the aggregation layer switches to alleviate this issue?D18912E1457D5D1DDCBD40AB3BF70D5D
- A. Implement route aggregation
- B. Implement graceful restart
- C. Implement bidirectional forwarding detection (BFD)
- D. Reduce the hello and dead interval timers
Answer: A
Explanation:
"BFD tests the connectivity between two IP addresses in a BFD session. BFD reports when connectivity is lost. The router (or routing switch) can then use that information to take the appropriate actions, depending on the functions to which you have tied BFD"
NEW QUESTION # 27
An administrator will be implementing tunneling between AOS-CX switches and Aruba gateways. Which list of protocols must minimally be allowed by an intermediate firewall between two sets of devices?
- A. IP protocol 50 and UDP 8209
- B. UDP 4500 and UDP 8209
- C. UDP 8211 and IP protocol 47
- D. UDP 4500 and IP protocol 47
Answer: C
Explanation:
ACSP Study Guide Page 788 - Allow the following protocols/ports
- PAPI: UDP 8211
- GRE: Protocoll 47
NEW QUESTION # 28
A company requires access by all users, guests, and employees to be authenticated. Employees will be authenticated using 802.1X, whereas guests will be authenticated using captive portal. Which type of authentication must be configured on an AOS-CX switch ports where both guests and employees connect?
- A. Both 802.1X and MAC-Auth
- B. 802.1X, captive portal, and MAC-Auth
- C. Both 802.1X and captive portal
- D. 802.1X only
Answer: D
NEW QUESTION # 29
What is a concept associated with PIM sparse mode (SM)?
- A. Recommended for use when high bandwidth connections exist.
- B. Requires periodic joins to maintain the shortest path tree (SPT).
- C. Implements a push content to forward traffic from the multicast source.
- D. Reverts to forwarding when the pruning state times out.
Answer: B
Explanation:
https://www.youtube.com/watch?v=PhzMcUcS6UA
NEW QUESTION # 30
An AOS-CX switch is configured to implement downloadable user roles. Examine the AOS-CX switch output:
Based on this output, what is the state of the user's access?
- A. The port should be configured for 802.1X
- B. No downloadable user role exists
- C. The RADIUS request timed out to the AAA server
- D. MAC authentication has passed, but 802.1X authentication is in progress
Answer: B
Explanation:
User role "Authenticated" was passed down but does not exist
NEW QUESTION # 31
An administrator of a company has concerns about upgrading the access layer switches. The users rely heavily on wireless and VoIP telephony. Which is the best recommendation to ensure a short downtime for the users during upgrading the access layer switches?
- A. Implement VSX on the AOS-CX access switches
- B. Implement VSF on the AOS-CX access switches
- C. Install AOS-CX 6300 or 6400 switches with always-on POE
- D. Install the in-service software upgrade (ISSU) feature with clustering enabled
Answer: B
NEW QUESTION # 32
A network administrator is implementing a configuration plan in NetEdit The administrator used NetEdit to push the configuration plan to the switch. Which option in the NetEdit planning section should the administrator select to save the configuration running on the switch to the startup-config?
- A. VALIDATE
- B. EDIT
- C. DEPLOY
- D. COMMIT
Answer: D
NEW QUESTION # 33
......
Prepare Top HP HPE6-A73 Exam Audio Study Guide Practice Questions Edition: https://freetorrent.pdfdumps.com/HPE6-A73-valid-exam.html